COMPANY HEADER
Request Information
WPT® Low Inertia Brakes (LIB) are well suited for high cycle and tension control applications, such as steel shears and unwind stands. The LIB utilize a ventilated design to optimize the airflow in and out of the brake. This increased airflow allows the brake to run cooler in high cycle applications. WPT®'s Low Inertia Brakes are available in 1, 2, or 3 plate configurations with sizes ranging from 6 through 60 inches.
Unit of Measure

Specifications

Brands

 N/A WPT®
Static Torque Rating at 100 Pound per Square Inch (psi) (7 bar) Pressure1 N/A 84800 lbf·in9580 N·m

Maximum Speed Hub and Center Plate (CP)

 N/A 2460 rpm

Maximum Slip Speed

 N/A 1640 rpm

Lining Area

 N/A 500 in²3200 cm²
Minimum Bore Range2 N/A 1.88 in47.8 mm
Maximum Bore Range3 N/A 3.90 in99.1 mm

Weight and Inertia

Total Weight

 N/A 290 lb130 kg

Hub and Center Plate (CP) Weight

 N/A 120 lb56 kg

Hub and Center Plate (CP) Inertia

 N/A 17 lb·ft²0.72 kg·m²

Dimensions

Dimension - A

 N/A 18.750 in476.25 mm

Dimension - A Tolerance

 N/A +0.000 in-0.003 in+0.00 mm-0.08 mm

Hole Circle (B)

 N/A 17.50 in444.5 mm

Diameter (B)

 N/A 21/32 in

Quantity

 N/A 8

Dimension - C

 N/A 14.375 in365.13 mm

Dimension - C Tolerance

 N/A +0.000 in-0.003 in+0.00 mm-0.08 mm

Dimension - A (Metric Mounting)

 N/A 470.00 mm

Dimension - A Tolerance (Metric Mounting)

 N/A +0.00 mm-0.08 mm

Hole Circle (B) (Metric Mounting)

 N/A 445.0 mm

Diameter (B) (Metric Mounting)

 N/A 18.0 mm

Quantity (Metric Mounting)

 N/A 8

Dimension - C (Metric Mounting - H7)

 N/A 370.00 mm

Dimension - D

 N/A 17-1/2 in444.5 mm

Dimension - E (Ventilated Center Plate)

 N/A 9-13/16 in44.5 mm

Features

Features

 N/A
  • Predictable preventative maintenance
  • Available in hydraulic or pneumatic actuation
  • Solid, slotted, or ventilated center plate options
  • Available with Full Marine Corrosion Protection package
  • Compatible with the Power Performance LI upgrade
  • High cycle life

Note

Note

 N/A Consult WPT® Application Engineering for application assistance, service factors, specifications, and detailed drawings/3D models.
  • 1 Dynamic (slipping) torque is 75% of the static torque.
  • 2 Contact WPT® for larger bore sizes. Listed bore sizes are for square key.
  • 3 Contact WPT® for larger bore sizes. Listed bore sizes are for square key.