COMPANY HEADER
Request Information
WPT® Steel Water Cooled (SWC) Brakes are designed for high-heat applications, such as coil processors and high-cycle press / shear lines. The unique design of the steel water jackets allows for the rapid transfer of heat to an external cooler or recirculation system. This increased heat transfer capabilities allow the Steel WCB to operate in continuous slip applications. WPT®'s Steel WCBs are available in 1, 2, or 3 plate configurations with sizes ranging from 6 through 30 inches.
Unit of Measure

Specifications

Brands

 N/A WPT®
Static Torque at 100 Pounds per Square Inch (psi) (7 Bar) Pressure1 N/A 11700 lbf·in1320 N·m

Maximum Speed Hub and Drive Plate

 N/A 4300 rpm

Maximum Speed Slip

 N/A 2870 rpm

Heat Dissipation Capacity

 N/A 18 hp13.4 kW

Minimum Water Flow

 N/A 3 gal/min11 L/min

Lining Area

 N/A 43 in²280 cm²
Minimum Bore Range2 N/A 1.13 in28.7 mm
Maximum Bore Range3 N/A 2.50 in63.5 mm

Weight and Inertia

Total Weight

 N/A 140 lb64 kg

Hub and Drive Plate (DP) Weight

 N/A 22 lb9.8 kg

Hub and Drive Plate (DP) Inertia

 N/A 0.85 lb·ft²0.036 kg·m²

Dimensions

Dimension - A

 N/A 12.125 in307.98 mm

Dimension - A Tolerance

 N/A +0.000 in-0.003 in+0.00 mm-0.08 mm

Hole Circle (B)

 N/A 11.13 in282.7 mm

Diameter (B)

 N/A 17/32 in

Quantity

 N/A 4

Dimension - C

 N/A 8.375 in212.73 mm

Dimension - C Tolerance

 N/A +0.003 in-0.000 in+0.08 mm-0.000 mm

Dimension - D

 N/A 11-1/8 in282.6 mm

Dimension - E

 N/A 8-7/8 in225.4 mm

Imperial Mounting Coolant Ports (P)

 N/A 3/8

Imperial Mounting Thread Type

 N/A National Pipe Thread (NPT)

Dimension - A (Metric Mounting)

 N/A 310.00 mm

Dimension - A Tolerance (Metric Mounting)

 N/A +0.08 mm-0.000 mm

Hole Circle (B) (Metric Mounting)

 N/A 280.0 mm

Diameter (B) (Metric Mounting)

 N/A 14.0 mm

Quantity (Metric Mounting)

 N/A 4

Dimension - C (Metric Mounting - H7)

 N/A 220.00 mm

Metric Mounting Coolant Ports (P)

 N/A 1/2

Thread Type

 N/A British Standard Pipe Taper Thread (BSPT)

Features

Features

 N/A
  • High cycle life
  • Predictable preventative maintenance
  • Low-inertia drive plate configuration
  • Durable steel water jacket design
  • Standardized mounting for OEM applications, rebuilds, or retrofits
  • Maximum heat transfer
  • Low-inertia drive plate design

Note

Note

 N/A Consult WPT® Application Engineering for application assistance, service factors, specifications, and detailed drawings/3D models.
  • 1 Dynamic (slipping) Torque is 75% of the Static Torque.
  • 2 Contact WPT® for larger bore sizes. Listed bore sizes are for square key.
  • 3 Contact WPT® for larger bore sizes. Listed bore sizes are for square key.