COMPANY HEADER
Request Information
WPT® Steel Water Cooled (SWC) Brakes are designed for high-heat applications, such as coil processors and high-cycle press / shear lines. The unique design of the steel water jackets allows for the rapid transfer of heat to an external cooler or recirculation system. This increased heat transfer capabilities allow the Steel WCB to operate in continuous slip applications. WPT®'s Steel WCBs are available in 1, 2, or 3 plate configurations with sizes ranging from 6 through 30 inches.
Unit of Measure

Specifications

Brands

 N/A WPT®
Static Torque at 100 Pounds per Square Inch (psi) (7 Bar) Pressure1 N/A 811000 lbf·in91600 N·m

Maximum Speed Hub and Drive Plate

 N/A 1150 rpm

Maximum Speed Slip

 N/A 770 rpm

Heat Dissipation Capacity

 N/A 210 hp306.5 kW

Minimum Water Flow

 N/A 62 gal/min234 L/min

Lining Area

 N/A 1200 in²7500 cm²
Minimum Bore Range2 N/A 3.50 in88.9 mm
Maximum Bore Range3 N/A 7.00 in177.8 mm

Weight and Inertia

Total Weight

 N/A 2700 lb1200 kg

Hub and Drive Plate (DP) Weight

 N/A 1000 lb470 kg

Hub and Drive Plate (DP) Inertia

 N/A 630 lb·ft²26 kg·m²

Dimensions

Dimension - A

 N/A 37.000 in939.80 mm

Dimension - A Tolerance

 N/A +0.000 in-0.003 in+0.00 mm-0.08 mm

Hole Circle (B)

 N/A 35.50 in901.7 mm

Diameter (B)

 N/A 25/32 in

Quantity

 N/A 16

Dimension - C

 N/A 30.375 in771.53 mm

Dimension - C Tolerance

 N/A +0.003 in-0.000 in+0.08 mm-0.000 mm

Dimension - D

 N/A 34-3/4 in882.7 mm

Dimension - E

 N/A 22 in558.8 mm

Imperial Mounting Coolant Ports (P)

 N/A 3/4

Imperial Mounting Thread Type

 N/A National Pipe Thread (NPT)

Features

Features

 N/A
  • High cycle life
  • Predictable preventative maintenance
  • Low-inertia drive plate configuration
  • Durable steel water jacket design
  • Standardized mounting for OEM applications, rebuilds, or retrofits
  • Maximum heat transfer
  • Low-inertia drive plate design

Note

Note

 N/A Consult WPT® Application Engineering for application assistance, service factors, specifications, and detailed drawings/3D models.
  • 1 Dynamic (slipping) Torque is 75% of the Static Torque.
  • 2 Contact WPT® for larger bore sizes. Listed bore sizes are for square key.
  • 3 Contact WPT® for larger bore sizes. Listed bore sizes are for square key.